PREMIUM PARTS
As the nation’s #1 garage door company, we take pride in using the best garage door parts to repair your door. Higher quality parts mean a safer, long-lasting garage door to protect your family, valuables, and home. The comparisons below detail why our parts offer the best value for our customers.
PRECISION™ PARTS
CONTRACTOR GRADE PARTS
PRECISION™ PARTS
VS
CONTRACTOR GRADE PARTS

Premium springs are coated in maintenance-free high cycle powder to protect from rust and damage, which typically lasts up to five times longer.
TORSION SPRINGS
Contractor grade springs are oil tempered and will eventually
rust and wear out over time and require biannual maintenance.

OUR TORSION SPRINGS

Premium springs are coated in maintenance-free high cycle powder to protect from rust and damage, which typically lasts up to five times longer.
CONTRACTOR GRADE TORSION SPRINGS

Contractor grade springs are oil tempered and will eventually
rust and wear out over time and require biannual maintenance.

Premium flexible and quiet stainless steel aircraft-grade cables—with 19 wires per strand—last longer than standard cables.
CABLES
Standard cables only utilize 7 wires per strand, and are less flexible and noisier.

OUR CABLES

CONTRACTOR GRADE CABLES


Premium drums are 2” wide with a groove to prevent cable fraying.
CABLE DRUMS
Contractor grade drums are 1¼” wide, which can lead to potential cable fraying.

OUR CABLE DRUMS

CONTRACTOR GRADE CABLE DRUMS


Premium rollers are coated in nylon with a seam bearing and a 5” stem.
ROLLERS
Contractor grade rollers are usually a plastic wheel with a 4” stem that breaks down faster.

OUR ROLLERS

CONTRACTOR GRADE ROLLERS


Premium center bearings are made of steel to help the entire torsion system to operate smoothly.
CENTER BEARINGS
Contractor grade center bearings
are made of plastic, with a plastic bushing, which only provides center support.

OUR CENTER BEARINGS

CONTRACTOR GRADE BEARINGS

are made of plastic, with a plastic bushing, which only provides center support.

Premium hinges are made of a thicker 14-gauge steel, which means no cracking or breaking.
HINGES
Contractor grade hinges are made of thinner 16-20 gauge steel,
causing them to be flimsier and more prone to breaking or snapping.

OUR HINGES

CONTRACTOR GRADE HINGES

causing them to be flimsier and more prone to breaking or snapping.

Premium end bearing brackets bolt to the track and wall, giving them four connection points that prevent binding of the torsion system.
END BEARING BRACKETS
Contractor grade end bearing brackets are made of un-reinforced steel, and only have two connection points.

OUR END BEARING BRACKETS

CONTRACTOR GRADE END BEARING BRACKETS


Premium operational brackets are long steel bars that reinforce the operator. They distribute the force from the top panel and reduce the risk of it ripping out.
OPERATIONAL BRACKETS
Contractor grade brackets are smaller square steel bars with a much higher risk of ripping out because the force is concentrated into a small area.

OUR OPERATIONAL BRACKETS

CONTRACTOR GRADE OPERATIONAL BRACKETS
